You will have to calculate parameters using the formulas we provide on this website. Janus provides up to +30 Volt in one channel and up to -30 Volt in the second channel. These voltages are adjustable in the range between 1.2 and 30 Volts in each channel. Janus does not provide 60 Volt output. Janus provides two voltage outputs +30 Volt and -30 Volt, measured against ground. The LM regulators determine the output voltages.
2. Which Hammond transformer would be best for that application?
Janus is designed for use with transformers that have two secondary windings and a centre tap. The AC output of each winding has to be between 24 and 26 Volt AC (for example 182H9 and 182L12).
3. Can "soft start" be added, like in the other PS boards?
In this range of voltages (+/-30 Volt) it is not required.
4. Is there anything that can/should be done to improve the buffer boards?
The boards appear to be of good quality.
5. Is the Janus the best choice for this application?
This is a decision you have to make yourself based on the requirements of your project. The parameters of Janus are disclosed on its URL.Statistics: Posted by Augustica.com — 22 Jan 2017, 11:23
]]>